BCM faults after battery change

Random Caddy chat.
Not the place for sale or wanted topics.
User avatar
Bugsy
Caddy2k Groupie
Posts: 14
Joined: Wed Sep 11, 2024 8:36 am
Engine size/power: 1.6 CR TDI (102bhp)

BCM faults after battery change

Post by Bugsy »

I have a 2014 Caddy maxi
When i got the van there were a couple of things hard wired. The horn and the windscreen wash. There 2 buttons on the dash now, but I figured that was either a cluster or clock spring fault and its been driving fine for the past 12 months soi have left those alone for now.
Recently the battery was going flat if i never used the van for a few days, a jump start worked every time. Got the odd weird fault, lights staying on or flashing which i assumed were to do with the imobisers or something like that, but i left the van run for 30 mins and next day van started fine with no faults.
I have now replaced the 027 with an 096 but since I changing the battery i'm now getting weird faults (no wipers, door window switches not working, no radio, no indicators and the lights staying on) Central locking not working but can unlock passenger door with switch on door with key in ignition but the back doors not unlocking.

Is this possibly a dead BCM ?

Run VCDS and this is the result :

Chassis Type: 2K-VN35 (7N0)
Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56

VIN: WV1ZZZ2KZEX101513 Mileage: 190130km-118141miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Cannot be reached 1100
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: Cannot be reached 1100
52-Door Elect, Pass. -- Status: Malfunction 0010
56-Radio -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYD) Labels:. 03L-906-023-CAY.clb
Part No SW: 03L 906 023 PC HW: 03L 907 425 C
Component: 1,6l R4 CR td H43 6928
Revision: --H43--- Serial number: 00000000000000 CVN: 65FF23FA
Coding: 00114014030500080000
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_ECM16TDI02103L906023PC 003008
ROD: EV_ECM16TDI02103L906023B_003.rod
VCID: 76E353DFC9C73426E9-8022
VINID: 9E606AAAA09BA95A010011410CEA254577

1 Fault Found:
7318 - Body Control Module (Central Electric)
U0140 00 [00101111] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Mileage: 190134 km
Date: 2025.08.15.
Time: 11:45:22

Engine RPM: 780.00 /min
Normed load value: 27.8 %
Vehicle speed: 0 km/h
Coolant temperature: 72 °C
Intake air temperature: 32 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 13.440 V
Unlearning counter according OBD: 40
Driver intention torque-TQI_DRIV_SUB: 0.00 Nm
Control Module temperature-TECU: 37 °C

Readiness: 0110 1000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BM HW: 1K0 907 379 BM
Component: ESP MK60EC1 H46 0164
Revision: 00H46001
Coding: 633C400D092203FBC61002E5901CC081A0000020
Shop #: WSC 35110 377 08192
VCID: 7EF34BFFE9F77C66B1-802A

1 Fault Found:
00457 - Central Electronics Control Module / BCM (J519)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Time Indication: 0
Date: 2020.01.06.
Time: 11:45:22

Freeze Frame:
Count: 0
Count: 14
Count: 12800
Count: 8262
Count: 47360
Count: 57088
Count: 511
Count: 0


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels:| 3C8-907-336.clb
Part No SW: 7N0 907 426 CH HW: 7N0 907 426 CH
Component: AC Manuell H20 0606
Revision: 00001002
Coding: 0010004002
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_ACManueBHBVW36X A01010
ROD: EV_ACManueBHBVW36X_VW32.rod
VCID: 7CF741F7F7EB6E769F-8028

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.
Cannot be reached
Unable to communicate with address 09. Are you sure the doors are unlocked?

I DID MANUALLY UNLOCK EACH DOOR AND HAD THEM ALL OPEN BUT AS I SAID NO CENTRAL LOCKING WORKING

-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 7E0 959 655 B HW: 7E0 959 655 B
Component: VW10Airbag02Q H07 0013
Revision: -------- Serial number: 003HL00MKBV$ Dataset Number: 2KC003v____ 0285
Coding: 000000000000000000000000000000003251
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
ROD: EV_AirbaVW10BPAVN750.rod
VCID: 356194D394417F3E20-8060

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels:| 5K0-953-569.clb
Part No SW: 1K5 953 521 BG HW: 5K0 953 569 AC
Component: LENKS.MODUL 016 0140
Revision: FF010042 Serial number: 20140115200474
Coding: 0080060000
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_SMLSNGVOLWSXS A01004
ROD: EV_SMLSNGVOLWS.rod
VCID: 73E56ACBDAB5210ECE-8026

1 Fault Found:
117012 - Databus
U1121 00 [00001001] - Missing Message
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Date: 2025.08.15.
Time: 11:45:16


-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 2K0 920 966 A HW: 2K0 920 966 A
Component: KOMBI H04 0809
Serial number: 00000000000000
Coding: 480000
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
VCID: 2E53BBBF71174CE661-807A

2 Faults Found:
12664832 - Function Restricted due to Missing Message(s)
U1111 00 [00001001] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Date: 2025.08.15.
Time: 11:45:16

13631488 - Function Restricted due to Missing Message(s)
U1111 00 [00001001] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Date: 2025.08.15.
Time: 11:45:16


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 AK HW: 7N0 907 530 AK
Component: J533 Gateway H57 1642
Revision: H57 Serial number: 170114F2002453
Coding: 357401
Shop #: WSC 35110 377 08192
VCID: 79F958E3F0D95B5E84-802C

3 Faults Found:
00457 - Central Electronics Control Module / BCM (J519)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Time Indication: 0
Date: 2020.01.06.
Time: 11:55:15

01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Time Indication: 0
Date: 2020.01.06.
Time: 11:55:15

01305 - Databus for Infotainment
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 39
Mileage: 190134 km
Time Indication: 0
Date: 2020.01.06.
Time: 11:55:14


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 0809
Serial number: 00000000000000
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW23.rod
VCID: 6ADB77AF8D7FE0C67D-803E

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb
Part No SW: 1T0 959 701 T HW: 1T0 959 701 T
Component: Tuer-SG 009 2110
Coding: 0000560
Shop #: WSC 35110 377 08192
VCID: 489FED273BB3F2D64B-801C

2 Faults Found:
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication
00457 - Central Electronics Control Module / BCM (J519)
004 - No Signal/Communication

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb
Part No: 1K0 909 144 R
Component: EPS_ZFLS Kl. 140 3501
Revision: 00H22000
Shop #: WSC 35110 377 08192
VCID: 397998E370599B5EC4-806C

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.
Cannot be reached

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb
Part No SW: 1T0 959 702 R HW: 1T0 959 702 R
Component: Tuer-SG 009 2110
Coding: 0000560
Shop #: WSC 35110 377 08192
VCID: 479DEE1B36ADFDAE42-8012

2 Faults Found:
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication
00457 - Central Electronics Control Module / BCM (J519)
004 - No Signal/Communication

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached

End-------------------------(Elapsed Time: 02:49)--------------------------

I tried disconnecting the battery and left the negative off for 30 mins, but still the same.
BCM is 5K0937085AA
Image

Gateway Module is 7N0907530AK
Image
Any help would really be appreciated.

Thanks
STP
Twin Turbo poster
Posts: 496
Joined: Wed Jan 29, 2025 7:01 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: BCM faults after battery change

Post by STP »

Obviously the BCM is not communicating, it could be faulty but also it could be just a fuse. I would check the continuity of all fuses in the engine bay fusebox and the internal one to see what and how many, if any, are blown and start there.

Replacement batteries need coding in (just change serial number by one digit) in VCDS. But without comms to the BCM / cecm then you won't be able to do that. Also check any twisted pairs of wires especially as they are canbus comms wiring between modules, any break, chafing or disconnection will cause no communication between one or more modules. Usually different colours like white/red strip plus plain white etc, but can be other colours. All twisted pairs are canbus serial communication wires between your devices.
2015 SWB Van, 1.6 CR TDI with Cruise Control, Heated Mirrors, Highline Clocks & MFD, VW Hands Free Bluetooth, Electric Windows, Reversing Cameras, DPF Monitor, Thatcham Cat 2.

My build thread: White MK3 Facelift

My DPF Monitor thread: DPF Monitor
User avatar
Bugsy
Caddy2k Groupie
Posts: 14
Joined: Wed Sep 11, 2024 8:36 am
Engine size/power: 1.6 CR TDI (102bhp)

Re: BCM faults after battery change

Post by Bugsy »

I double checked all the fuses again and non blown, so i took each one out and physically checked them and on removing one of the 30 amp ones under the dash it arched, so i gave it a clean up and put it back in and made sure it was seated tight and everything came back to life.
Thanks STP
STP
Twin Turbo poster
Posts: 496
Joined: Wed Jan 29, 2025 7:01 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: BCM faults after battery change

Post by STP »

Nice one, glad to hear it's sorted with a fuse.
2015 SWB Van, 1.6 CR TDI with Cruise Control, Heated Mirrors, Highline Clocks & MFD, VW Hands Free Bluetooth, Electric Windows, Reversing Cameras, DPF Monitor, Thatcham Cat 2.

My build thread: White MK3 Facelift

My DPF Monitor thread: DPF Monitor
Post Reply