The Caddy Alloys Thread

Ciaranscar · Post by **Ciaranscar** » Tue Apr 03, 2018 11:52 am

I put C5 on my wheels before fitting. Money and time well spent
I have 18” 9.5 on the back and they catch the side door.
Has anyone put washers to the roller mechanism to bring it out further to clear the alloys?

Sent from my iPhone using Tapatalk

RKDesigns · Post by **RKDesigns** » Wed Apr 04, 2018 12:11 am

LTCKY wrote:

Et45 8,5J i have the wider rear axle 140hp euro5 engine in the Caddy 4

Verzonden vanaf mijn iPhone met Tapatalk

hef355 · Post by **hef355** » Wed Apr 04, 2018 12:18 am

Ciaranscar wrote: I have 18” 9.5 on the back and they catch the side door.
Has anyone put washers to the roller mechanism to bring it out further to clear the alloys?

I have 10j x 20” rears and 8.5j fronts both et45, i removed a section of my lower door for the door to clear rear wheels. Doesn’t look right to shim door imo.

Sent from my iPhone using Tapatalk

Ciaranscar · Post by **Ciaranscar** » Wed Apr 04, 2018 4:56 pm

Ya that’s what I was worried about. Pitty the rollers done go in a bit more

Sent from my iPhone using Tapatalk

hef355 · Post by **hef355** » Thu Apr 05, 2018 1:22 am

This is what i did mate

Sent from my iPhone using Tapatalk

Ciaranscar · Post by **Ciaranscar** » Thu Apr 05, 2018 10:45 am

I may have to do that

did it take you long?

Sent from my iPhone using Tapatalk

hef355 · Post by **hef355** » Fri Apr 06, 2018 2:03 am

It does the trick and took 2 or 3 hours with taking door off and refitting. If I can help, just shout!

Sent from my iPhone using Tapatalk

Ciaranscar · Post by **Ciaranscar** » Fri Apr 06, 2018 9:16 am

What way dose it look finished with the panel on .. or did you have to do that differently?

Sent from my iPhone using Tapatalk

Ripper182 · Post by **Ripper182** » Fri Apr 06, 2018 9:03 pm

PaulC61 wrote:Ripper 182, love them Bola B12's and nicely filled arches. Did want a set myself in matt black, but as I'm staying at standard ride height they would look silly in the arches.

Yeah they do fit nicely, they are 18’s with 225/40 tyres. I’m having air fitted soon so will be able to drop it down for play time and raise it up for work time! Get a set mate.

Sent from my iPhone using Tapatalk

kox · Post by **kox** » Mon Apr 09, 2018 8:47 pm

Bentley Mulliner
9 x 19. Et 41
225/35/19 Dunlop

Sent from my iPhone using Tapatalk

Super64 · Post by **Super64** » Tue Apr 10, 2018 9:04 pm

Just got a set of 5 spoke 18” A6 s-line wheels for mine. Will have to wait to fit em as they need a refurb. Some slick looking caddy’s on here.

waterboyrob · Post by **waterboyrob** » Fri Apr 13, 2018 5:34 pm

Rota Slip 18's

Lows needed.

DANDANZ · Post by **DANDANZ** » Fri Apr 13, 2018 5:35 pm

Nice 🖒🖒

Sent from my SM-G900F using Tapatalk

Mickst3r · Post by **Mickst3r** » Sat Apr 21, 2018 12:39 pm

Hi.
This is my caddy from sweden with 3sdm 001, 18" x 9,5" on all 4. With nankang ns2 and TA-Technix coils.

Pepsi · Post by **Pepsi** » Tue Apr 24, 2018 8:41 am

Looks good. Any trouble with the side door??

Sent from my iPhone using Tapatalk

CADDY2K.com

The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread

Re: The Caddy Alloys Thread