Page 1 of 1
6 Speed Completed
Posted: Sat Sep 05, 2009 10:28 pm
by jazza
Re: 6 Speed Completed
Posted: Sat Sep 05, 2009 11:09 pm
by richie
nice to see the club working together

, would be nice to drive both to see the two different ratios in action
Re: 6 Speed Completed
Posted: Mon Sep 07, 2009 5:25 am
by Lams
Sounds good - would love to find out what's involved in this
Re: 6 Speed Completed
Posted: Mon Sep 07, 2009 11:48 am
by myloyams
Lams wrote:Sounds good - would love to find out what's involved in this
Have a look here
http://www.caddy2k.com/forum/viewtopic.php?f=22&t=410" onclick="window.open(this.href);return false;
It's not that difficult to do, no harder than changing a clutch.
Re: 6 Speed Completed
Posted: Mon Sep 07, 2009 4:26 pm
by jazza
If anyone is considering doing this i would say do it.
Changes the van completely, engine can barely be heard any more, lovely to drive now.
At 100km/h just 1500rpm....unbelieveable difference.
Gear ratio's so much longer aswell.
Re: 6 Speed Completed
Posted: Tue Sep 08, 2009 1:55 pm
by aidy310
sounds like a good job if your on the motorway alot then with the longer ratios lol
Re: 6 Speed Completed
Posted: Wed Sep 09, 2009 9:46 pm
by VW-PADDY-TDI
what would it be like for pulling a trailor???

Re: 6 Speed Completed
Posted: Wed Sep 09, 2009 10:28 pm
by 7555doctor
its fine its just like the 5 speed with another gear stuck on.
Re: 6 Speed Completed
Posted: Thu Sep 10, 2009 12:06 am
by Lams
We never had TDI mk4s in this country
Would a mk5 2.0TDI 6spd box be a direct swap? A few of them have crashed now since they arrived here in 2005
Re: 6 Speed Completed
Posted: Thu Sep 10, 2009 8:32 pm
by 7555doctor
yea will work you need to get the golf driveshats because they will be shorter because the diff is bigger lad
Re: 6 Speed Completed
Posted: Fri Sep 11, 2009 3:07 am
by Lams
very nice - that's what I like to hear

Re: 6 Speed Completed
Posted: Sat Sep 12, 2009 7:08 pm
by carsounds_dan
you need to remove the outer CV joints from the caddy shafts, and put these onto the golf shafts.
Theres a lot involved, but there is a how to.
You'll need a 10mm and 12mm spline drive sockets aswell btw.
Daniel
Re: 6 Speed Completed
Posted: Thu Oct 08, 2009 12:31 pm
by wonderdetail
This looks like an awesome mod!
Re: 6 Speed Completed
Posted: Sat Oct 10, 2009 1:20 pm
by Dall
But why no pics??
Re: 6 Speed Completed
Posted: Sun Oct 11, 2009 1:12 pm
by vanworx
Can you post up some top end speeds and the revs so we can see what differences there are. Also if someone has access to a 'private road' can they see what the top end is. I make mine abouyt 120 ish at the mo. Would be great to get some more on this because the van is up to it......