Page 1 of 4
Caddy 3.2 v6 conversion
Posted: Sun Sep 12, 2021 10:05 pm
by Beggsy
So it starts. I have both machines ready to morf into 1 epic hyper caddy. This is going to be a massive learning curve for myself and I’m looking forward to the build and many headaches to come.
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Sun Sep 12, 2021 10:11 pm
by Jeffers76
Like these, will be following this
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Mon Sep 13, 2021 8:53 am
by C Chis
Brilliant!
Looks like we’re both doing the exact same conversion
Looking forward to seeing your progress and the finished conversion.
Sent from my iPad using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Mon Sep 13, 2021 10:11 am
by Beggsy
Brilliant maybe we can guide each other. Happy days
Sent from my iPhone using Tapatalk
Caddy 3.2 v6 conversion
Posted: Mon Sep 13, 2021 10:33 am
by C Chis
Brilliant, would be great to share experiences, etc!
I’m still waiting on my Audi being delivered
There are a few guys on here that have also went down the V6 route that are more than happy to help as well.
Best forum for advice, guidance and everything Caddy
Sent from my iPad using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Mon Sep 13, 2021 7:22 pm
by Sean1066
I will be watching this build with a lot of interest.
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 11:59 am
by Beggsy
Just a quick question regarding wiring, are there any recommendations of a person or company to wire the 3.2 into the caddy?
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 1:22 pm
by hef355
Cant recommend myself obviously but i can do the whole job easily for you buddy.
Done a few of these now as well as tfsi’s … Is the donor car running, tested and no issues?
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 1:57 pm
by Beggsy
The donor car is running great , I haven’t had a chance to plug the vcds in as yet, I’ll do it today at some point.
Superb this part of the build was really worrying me. Where are you based?
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 2:17 pm
by hef355
Hi mate, i’m based in Anglesey North Wales LL60 6AL
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 2:27 pm
by Beggsy
Just over the estuary I’m Wirral based, do you have a contact number so we can have a chat about it?.
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 3:00 pm
by hef355
Yes matey can you dm me or email me on
hefinstar@hotmail.co.uk
Couple of forum members recommendations on your other thread too mate
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Thu Sep 16, 2021 6:21 pm
by Jeffers76
@Beggsy Cool your not far from me so I’ll be able to see this in the metal once it’s done hopefully
Sent from my iPhone using Tapatalk
Re: Caddy 3.2 v6 conversion
Posted: Sun Sep 19, 2021 4:11 pm
by Exuptoy
How hard is this conversion then? Is it simply a case of mounting the engine and ancillaries and transplanting the loom and clocks etc before clearing codes? That sounds too easy?
Re: Caddy 3.2 v6 conversion
Posted: Wed Dec 08, 2021 9:18 pm
by C Chis
Hi [mention]Beggsy [/mention]
Have you started on swapping the 3.2 into your caddy yet?
Sent from my iPad using Tapatalk