CADDY2K.com

Thank you, here is standard AC control MK4 2016 65plate

Also passenger side has more connections


Sent from my iPhone using Tapatalk

Hi.
A tip....
Though your panel has a blank. This can be swapped over to a new panel, and the button put onto your old panel, for resale?
Behind your blank is a working switch mechanism.
If you can't pm yet, you can email me andrew@caddy2k.com

Tommyzoom thanks for contact, I’ve emailed you.
Anthony


Sent from my iPhone using Tapatalk

How did you get on with this one?

Had a guy lined up to fit them two weeks ago, and he’s dropped me and left country. Why is it only polish that I can find to do work to Vw’s anyone know anyone in brum area who can do this work. I don’t fancy melting my harness!


Sent from my iPhone using Tapatalk

It should be an easy mod to do with the instructions you will have been supplied with the harness. I’m
No mod god but found it quite easy to do my
Golf R seats.


Sent from my iPhone using Tapatalk

Maybe I should just jump in with two feet.
Do you have to remove part of dash? Under wheel.


Sent from my iPhone using Tapatalk

How did you code heated seats in?


Sent from my iPhone using Tapatalk

I took my radio out and removed the heater control panel so I could see where the wires plugged in. You need to drop your fuse box to add the two wires. Also one wire goes to the bcm which is by the fuse box. And earths are straight forward on each side of the sill. Just lay the loom out as shown in the diagram and follow it step by step. Then put your seats back in and plug them in and add the fuses to the fuse box. Remember the seats need to slide backwards and forwards so be sure to make sure the loom is has some slack at the seat end.
It’s not really coding you need to do but you will need vcds to activate the heated seats and save the settings. It’s pretty straight forward really. Took me about 30 mins from start to finish.

Did you get the heated Seat control module when you bought the loom? That just clips under the passenger seat.


Sent from my iPhone using Tapatalk

Thanks for that, yes I got 8 pin module! I’ll have to have a go I think.


Sent from my iPhone using Tapatalk

nice job thanks !!!

Eventually got my GTI seats in! Comfy and heated function works. Tread, thanks to you all especially Andrew for wiring loom


Sent from my iPhone using Tapatalk

Eventually got them fitted by Jay @ black ice , diamond bloke.


Sent from my iPhone using Tapatalk