Page 1 of 5

2013 Caddy 2.0TDI 4motion (Norway)

Posted: Fri Nov 01, 2019 10:49 pm
by fazerfreak
my 2013..
ImageImage

plans is.. alu wintertires :lol:
tone the windos in backdoors..
touran armrest and seats : Done

thinking of making it a AT Caddy since i do dive alot in remote places. (just thinking :lol: )

Re: Newbee Caddy 4motion

Posted: Fri Nov 01, 2019 10:57 pm
by fazerfreak
removed dobbelpost

Re: Newbee Caddy 4motion

Posted: Sat Nov 02, 2019 7:03 am
by fazerfreak
new seats inn, from a touran included the base.. Image
need to figure out the wireing for heating..

i’ll put up better pictures later

Re: Newbee Caddy 4motion

Posted: Sat Nov 02, 2019 8:07 am
by NZDubNurd
fazerfreak wrote: Fri Nov 01, 2019 10:49 pm thinking of making it a AT Caddy since i do dive alot in remote places.
YES! 8)

Re: Newbee Caddy 4motion

Posted: Sat Nov 02, 2019 7:04 pm
by fazerfreak
A full cleanUp the rear 2day, doing the rest tomorrowImage

Sent fra min SM-G973F via Tapatalk


Re: Newbee Caddy 4motion

Posted: Sat Nov 02, 2019 9:19 pm
by Oldboybob
Will be keeping an eye on this project for sure, don't see many of them over here

Re: Newbee Caddy 4motion

Posted: Sun Nov 03, 2019 9:17 am
by fazerfreak
Time to do some cleanup in tha MainRoom ImageImage and fitt al the stuff from my old Audi A6 C5 wagon..

Also nice to have a touran partsCar to take what i want ImageImageImageImage

Sent fra min SM-G973F via Tapatalk


Re: Newbee Caddy 4motion

Posted: Sun Nov 03, 2019 12:21 pm
by fazerfreak
New progress.. sooo nice and clean now, it had been a farmersCar when i bought it.. noe sthe smell of "food" is gone Image
Nice with lots of storage ImageImage
Image
Image
Image
Nice and spacy behind the seats .
Image
Image
Had to cut out som space for the wall, also the mounting with the gearing had to be made with som "diy" , but worked out fine .
Image
Image
water and coffie is importan tools

Sent fra min SM-G973F via Tapatalk

Re: Newbee Caddy 4motion

Posted: Sun Nov 03, 2019 12:25 pm
by fazerfreak
Anyone know about a nice Roofgrind AT style that can be mounted direct in the holes without the bars? or som kinsa solution to make it smooth looking Image
Image

Sent fra min SM-G973F via Tapatalk

Re: Newbee Caddy 4motion

Posted: Sun Nov 03, 2019 5:42 pm
by fazerfreak
Hi..
i've got the vag-com so i wonder.. can the buttons on the steeringwheel be programmed?? i woild like to use the left/right buttens to change songs on Android Image
ImageImage

Sent fra min SM-G973F via Tapatalk


Re: Newbee Caddy 4motion

Posted: Sun Nov 03, 2019 8:59 pm
by fazerfreak
Thinking of using my old A6 winter wheels Image 16' 205/55 , the are dirty but thinking of repaint them next year..
Image

Sent fra min SM-G973F via Tapatalk

Re: 2013 Caddy 2.0TDI 4motion (Norway)

Posted: Tue Nov 05, 2019 6:13 am
by Sõber
I think you can teach/program steeringwheel buttons on your android, not in vag-com

Re: 2013 Caddy 2.0TDI 4motion (Norway)

Posted: Wed Nov 06, 2019 5:35 pm
by fazerfreak
mounted the winter-tires today, from my old audi..
a small Caddy2k meet with my friend Alvin ImageImageImage

Sent fra min SM-G973F via Tapatalk


Re: 2013 Caddy 2.0TDI 4motion (Norway)

Posted: Thu Nov 07, 2019 7:49 am
by fazerfreak
Winter is coming.... i need to get some noisecanseling in the car.. tires makes a loud noice... caddy is basic4 modell? so geus not that mutch insulation in it..
Image

Re: Newbee Caddy 4motion

Posted: Thu Nov 07, 2019 12:29 pm
by sylwiu_3gta

fazerfreak wrote:Hi..
i've got the vag-com so i wonder.. can the buttons on the steeringwheel be programmed?? i woild like to use the left/right buttens to change songs on Android Image

Sent fra min SM-G973F via Tapatalk
You can programe the buttons( maximum 6 of them) only if you have an aftermarket navigation, but with the OEM one and the phone conected via bluetooth I don't think is going to be possible.

Sent from my SM-G950F using Tapatalk