CADDY2K.com

Hey,
U have any holes in front bumper. :-)

Joke.

They do look smart, you have it stripped for paining?


Sent from my iPhone using Tapatalk

Boonalon wrote: ↑Sun Apr 12, 2020 9:53 pm They do look smart, you have it stripped for paining?

Yep- grills, rubs strips, grab handle and same idea as yourself with a black spoiler. My painter finding it hard to get his hands on paint is holding up the job though!

Ah nice another agri spec if your stuck for paint, we are in work on Wednesday to finish up a few Garda cars, I could get the lads in the body shop to mix up some paint

PM me if needed

Boonalon wrote: ↑Sun Apr 12, 2020 10:09 pm Ah nice another agri spec if your stuck for paint, we are in work on Wednesday to finish up a few Garda cars, I could get the lads in the body shop to mix up some paint

PM me if needed

I think my guy is getting some delivered... whoever decided van mods isn't an essential service needs their heads checked Cheers though!

Shameus:
Nice colour of Yours car.


Sent from my LLD-L31 via Tapatalk

Painted of rear door handle.
I hope if I make all works what I can during corona hollidays.
Br Matias

Sent from my LLD-L31 via Tapatalk

With lock down still in place I managed to complete several jobs on the van

Front & Rear new brake discs and pads. Opted for ebc ones, went for the 312mm upgrade for the front and stick to the standard 256mm on the rears plus new ultimax pads from them as well. Seem a lot better than the cheap ones that someone had fitted previously. Plus fluid change.

Fitted new Skoda Octavia vrs front calipers to replace the corroded old ones, direct fit if you have the correct size hub, do not need to extend the brake lines either.

New master cylinder, what a ballache that is to do haha.

The Touran door card modification, gives the interior a nicer feel to it, a dremmel cutter comes in handy when cutting around the wing mirror black plastic covers.

Like all things you repair one thing and another breaks

Next job is to replace the radiator as this is now leaking, surrounding pipe joints are bone dry, I will try and document this as I could not see a how to on this, if folks like.

Last of all, scan the van to see why my glowplug light is flashing, last scan showed a dtc, pointing to the brake light switch which I did not plug in correctly, so I’m hoping it’s not this.

Keep safe people

Dan

loglifter wrote: ↑Mon Apr 06, 2020 5:11 pm Fitted centre console/armrest, wish I could go for a drive to test it now


Sent from my iPhone using Tapatalk

Hey loglifter,

I'm interested in doing a similar fit in my Caddy and was wondering where you sourced the arm rest/center console from and was it from a Caddy or other VW model?

Aso dig those seats.

Cheers, Dean

Dean,
this armrest is from touran. I have prepair this too.
Can move upped, down, front and rear as U want.
Br Matias

Sent from my LLD-L31 via Tapatalk

Ripley55 wrote: ↑Sat Mar 28, 2020 6:59 pm
I’ve just test fitted my dash tray USB mod along with a photo of the W8 light from last week, just need the Red Backlit RLine MFSW with ACC. Will box it all up tomorrow when it’s light





Sent from my iPad using Tapatalk

Looking very nice sir. May I ask how you wired up the USB mod? I like that configuration and was wondering if you used a piggyback fuse spur for the mod if so can you recall which number fuse was used?

Cheers,
Dean

Removed my leaf springs so I could fit my polibushes on the bench in the garage,
Tomorow fit my maxi arb with poli bushes

Hi Dean
My original dash tray came factory fitted with a 12v socket outlet, and this would have been fused.

Anyway I removed this tray and unplugged it, and replaced with one from the scrappy's that was plain. I then tapped into the +ve and -ve at just behind the plug for the original 12v socket

I then fitted this unit from Amazon into the new plain tray
https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1

This unit also came with a 12v socket outlet, which so I replaced with another USB outlet

https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1

This second USB outlet came with a cable that was fused at 10A, so I actually used that as well for my feed. That will have a fuse behind it as well from the OEM socket outlet if that makes sense ?

Dave

Debadged the barn doors.... Was in 2 minds of to do it or not, but isolation and boredom kicked in

Before


After


Sent from my ONEPLUS A6003 using Tapatalk

Getting rid of 7 years worth of british gas grime: