I have and would advise it, using gps all the time seems like a pain there lots of combinations for you to keep it the same so your alloy choice wont be limitedAUSCaddyMaxiLife wrote: ↑Sun Jul 18, 2021 11:41 pm Do you bother with keeping the rolling diameters the same or just use GPS for a speedo?
The Caddy Alloys Thread
-
- Twin Turbo poster
- Posts: 492
- Joined: Sat May 02, 2020 8:37 pm
Re: The Caddy Alloys Thread
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
-
- Twin Turbo poster
- Posts: 492
- Joined: Sat May 02, 2020 8:37 pm
Re: The Caddy Alloys Thread
@Ade16 use https://www.willtheyfit.com/ to see how alloys will sit compared to your existing set up, for 18 and a width of 8j people tend to like a et45 off set, anywhere around that I'm sure you'dbe safe(do double check though), I've got 7.5j and et51 on mine and only stick out an extra 5/6 if I remember correctly so to me its perfect and for your search I'd go for anything under the vag group for what size you want and just see what offsets are. I ended up knowing what models have which offsets and all sorts by the time id finished
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
-
- 100BHP+
- Posts: 194
- Joined: Sat Jun 06, 2020 2:12 pm
Re: The Caddy Alloys Thread
Anyone know what wheels these are?
Sent from my E5823 using Tapatalk
Sent from my E5823 using Tapatalk
-
- Twin Turbo poster
- Posts: 492
- Joined: Sat May 02, 2020 8:37 pm
Re: The Caddy Alloys Thread
@veedubgub
VW Seattle
VW Seattle
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
-
- 100BHP+
- Posts: 194
- Joined: Sat Jun 06, 2020 2:12 pm
Re: The Caddy Alloys Thread
Thanks
Sent from my E5823 using Tapatalk
Sent from my E5823 using Tapatalk
Last edited by Giddy on Wed Aug 18, 2021 10:10 am, edited 1 time in total.
Reason: Removed unnecessary quote of previous post
Reason: Removed unnecessary quote of previous post
-
- 100BHP+
- Posts: 194
- Joined: Sat Jun 06, 2020 2:12 pm
Re: The Caddy Alloys Thread
Got one more (sorry)
Anyone able to put a name to these?
Sent from my E5823 using Tapatalk
Anyone able to put a name to these?
Sent from my E5823 using Tapatalk
-
- Twin Turbo poster
- Posts: 492
- Joined: Sat May 02, 2020 8:37 pm
Re: The Caddy Alloys Thread
@veedubgub I dont know the style name but theyre vw eos alloys
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
-
- 100BHP+
- Posts: 194
- Joined: Sat Jun 06, 2020 2:12 pm
Re: The Caddy Alloys Thread
Thanks again @RY_VW
Possibly Adelaides as i got a few results back with that name when searching for eos wheels
Sent from my E5823 using Tapatalk
Possibly Adelaides as i got a few results back with that name when searching for eos wheels
Sent from my E5823 using Tapatalk
-
- 100BHP+
- Posts: 179
- Joined: Fri Jul 20, 2018 11:11 pm
Re: The Caddy Alloys Thread
Fitted these Audi B7 DTM wheels 8J ET 43 with 225/40/18 Tyres
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Exuptoy
- Twin Turbo poster
- Posts: 340
- Joined: Wed Aug 25, 2021 10:17 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: The Caddy Alloys Thread
Only read as far as P20 and so far haven’t seen my rims in here. They’re genuine VW EOS/Passat ET47 7.5x18 Solitudes. Very similar to the 19” R32 rims but the spoke detail is slightly different.
Needs lowering now.
Mine were powder coated in Iodine colour() which is basically a metallic anthracite colour.
Needs lowering now.
Mine were powder coated in Iodine colour() which is basically a metallic anthracite colour.
-
- Caddy2k Groupie
- Posts: 15
- Joined: Wed Jul 14, 2021 3:56 am
- Engine size/power: 1.6 CR TDI (102bhp)
Re: The Caddy Alloys Thread
How do I figure out what wheels will fit?
-
- Twin Turbo poster
- Posts: 492
- Joined: Sat May 02, 2020 8:37 pm
Re: The Caddy Alloys Thread
@Carolthecaddy use https://www.willtheyfit.com/ for defence with offsets and widths, centre bore is 57.1 and stud pattern is 5x112. I think the most favoured setup is 8j and around et 42 but theres lots of setups people have got on if you have a read through this thread you'll see. I've gone with 7.5j width and et 51 and think it's perfect do you want aftermarket or vw group? If you go vw group most golf,touran,passat,leon,Octavia and the likes will go on
63 plate 1.6tdi startline in reflex silver
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
Colour coded-Audi s3 alloys-Seat leon seats-Van style roof rails-Needle sweep-cruise control.
RCD330-lowered on kw stx coilovers
More to follow
-
- Caddy2k Groupie
- Posts: 33
- Joined: Sun Sep 05, 2021 8:40 pm
- Engine size/power: 1.6 CR TDI (75bhp)
Re: The Caddy Alloys Thread
Anyone have any idea of what steels these are and what size they have been banded to?Mastakillahkungfu wrote:Only got one photo of banded steels.
Sent from my iPhone using Tapatalk
Cheers
Sent from my iPhone using Tapatalk
- JimBob3000
- Caddy Fan
- Posts: 64
- Joined: Mon Oct 07, 2019 10:54 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: UK, South West
Re: The Caddy Alloys Thread
Does anyone have any examples of either Mk7 GTI clubsports or Mk6 GTI Edition 35's on a black caddy?
- Giddy
- Hyper Poster
- Posts: 2152
- Joined: Fri Aug 24, 2018 5:56 pm
- Engine size/power: 1.4TSI
- Location: Gloucestershire, UK
Re: The Caddy Alloys Thread
@Stricky
Custom banded steel wheels. You can chose pretty much any size you want 15-19"
Custom banded steel wheels. You can chose pretty much any size you want 15-19"