Brooneye's build
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
[mention]Giddy [/mention] it’s for a display unit
[mention]Rickytango [/mention] thanks for taking the time to read, it’s well documented on the forum once you get full access you’ll be able to see the posts
Sent from my iPhone using Tapatalk
[mention]Rickytango [/mention] thanks for taking the time to read, it’s well documented on the forum once you get full access you’ll be able to see the posts
Sent from my iPhone using Tapatalk
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
Stripped, cleaned the rear floor and added some sound deadening.
Just got to do the arches and the sides and then carpet
Sent from my iPhone using Tapatalk
Just got to do the arches and the sides and then carpet
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 39
- Joined: Sun Mar 07, 2021 10:57 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Brooneye's build
Brilliant build hoping to put a newer dash and golf r wheel into mine in the next few weeks
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
[mention]Aronfields [/mention] thanks for taking the time to read through.
The dash and mfsw are well worth the time and effort to do
Sent from my iPhone using Tapatalk
The dash and mfsw are well worth the time and effort to do
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 39
- Joined: Sun Mar 07, 2021 10:57 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Brooneye's build
I have a mk7 golf at work that's damaged I might play about with the dash and mfsw in it to see if I can get it all working I have odis online vcds and I do car keys for a living so the immo side/coding shouldn't be an issue if I can work it out
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
The dash won’t work, it would have to be a touran one. There’s a little bit more involved on the mfsw side such as modules but if you have a search it’ll point you in the right direction
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Caddy2k Groupie
- Posts: 2
- Joined: Sun Apr 29, 2018 7:58 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Brooneye's build
Nice clean van mate, are you from the birtley area? Sure iv seen this about
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
Cheers [mention].danny [/mention] I work in Birtley. Take it you must be local
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Brooneye's build
Been busy over the last few months installing air ride and all the relevant upgrades.
I went for the airlift fonts, with the Intermotiv rear set up controlled by the 3P. Ran all the lines through the interior but totally forgot to take pictures of the install
While I was at it I upgraded to the 55mm hubs with a set of gti callipers and disks
Job for the weekend is to re do the carpet in the rear and if it’s delivered the second compressor harness, for some reason forgot to order it and a good clean
Sent from my iPhone using Tapatalk
I went for the airlift fonts, with the Intermotiv rear set up controlled by the 3P. Ran all the lines through the interior but totally forgot to take pictures of the install
While I was at it I upgraded to the 55mm hubs with a set of gti callipers and disks
Job for the weekend is to re do the carpet in the rear and if it’s delivered the second compressor harness, for some reason forgot to order it and a good clean
Sent from my iPhone using Tapatalk
- Sean1066
- Hyper Poster
- Posts: 2358
- Joined: Wed Oct 24, 2018 11:01 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Newton abbot Devon
Re: Brooneye's build
That air ride looks awesome.
So low its on the floor
So low its on the floor
- R22LRM
- 200BHP+
- Posts: 295
- Joined: Sun Aug 20, 2017 7:29 pm
- Engine size/power: 2.0 Stage 3+ TFSI
Re: Brooneye's build
Seriously low there mate, looking awesome
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
R22LRM
Mk5 Tfsi powered
Mk5 Tfsi powered
- Lister79
- Hyper Poster
- Posts: 2135
- Joined: Fri Jan 20, 2017 8:38 pm
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Lake District
Re: Brooneye's build
Looking good, very low. Have you still got the arch liners installed?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
-
- Hyper Poster
- Posts: 506
- Joined: Wed Feb 21, 2018 7:02 am
- Engine size/power: 1.9 TDI (104bhp)
Re: Brooneye's build
How low can you go?...
Well... to the floor actually.
Looks mint
Well... to the floor actually.
Looks mint
- brooneye
- Hyper Poster
- Posts: 1493
- Joined: Sun Jan 17, 2016 6:51 pm
- Engine size/power: 1.8 20V Turbo
Re: Brooneye's build
Thanks guys, it’s seriously low but that’s all part of the fun.
[mention]Lister79 [/mention] arch liners are back in with a little trimming
Sent from my iPhone using Tapatalk
[mention]Lister79 [/mention] arch liners are back in with a little trimming
Sent from my iPhone using Tapatalk
- Ripley55
- Hyper Poster
- Posts: 1134
- Joined: Sun Apr 07, 2019 4:38 pm
- Engine size/power: 2.0 TDI (140bhp)
- Location: Kent/Suffolk
Re: Brooneye's build
Hi @brooneye
Are the wheels OEM VW ? what sizes/ET/Width/Tyres etc mate ?
Cheers
Are the wheels OEM VW ? what sizes/ET/Width/Tyres etc mate ?
Cheers
Chestnut Brown Caddy MK4 Maxi Life 2.0Tdi 150bhp , 18” Matt Bronze OZ Ultraleggera’s 8Jx18 ET45 on Bridgestone 225/40/18’s