What did you do to your van today?

Stedlocks · Post by **Stedlocks** » Wed Oct 14, 2020 10:20 pm

got it absolutely minging in devon...! Cow shite everywhere!

Sean1066 · Post by **Sean1066** » Wed Oct 14, 2020 10:46 pm

What part of Devon did you visit?

Papa Bear · Post by **Papa Bear** » Wed Oct 14, 2020 10:47 pm

Got pushed off the road in Yorkshire by a DPD van. Hit a rock with tyre, nice big bulge!
Good news is my spare wheel bolts weren’t seized

Semster · Post by **Semster** » Thu Oct 15, 2020 4:46 am

Impulse bought this. Cheap though.

Now I just need everyone to confirm it won’t work in my caddy lol... /cry

Sent from my iPhone using Tapatalk

Cabbs · Post by **Cabbs** » Thu Oct 15, 2020 5:14 am

[mention]Semster [/mention]

It is defo capable of working in your caddy pal depending on year of van and if you have a highline steering wheel control module. There is loads of thread regarding this on here if you need to get a swcm.

Sent from my iPhone using Tapatalk

Semster · Post by **Semster** » Thu Oct 15, 2020 5:29 am

Thanks mate. Yeah I impulse bought.

I’m pretty sure my caddy is very basic.
I will have to wait and see when the wheel comes.

Definitely need new stalks (downgrade) as have cc on stalk and computer.

What I could read from taking the surrounds off.

5K0 953 507 AE
5K0 953 513 N CRUISE CONTROL

5K0 953 549 SLIP RING

2K0 920 865 J

2k5 880 201 f 81u Airbag

5k0 419 091 j kmy Steering Wheel

Thanks. I’ve been upgraded on this forum so I can start digging around more.

$225aud delivered. Is that good?

Wheel, airbag, and everything inside

Cabbs · Post by **Cabbs** » Thu Oct 15, 2020 5:40 am

[mention]Semster [/mention]

If your previous steering wheel had controls you might be ok but if not you’ll find most info here in these pics. Stalks are cheap to replace mate and if your lucky like me them I got a swcm off eBay for £25.

Your slip ring is listed as a lowline so will need replacing

Sent from my iPhone using Tapatalk

boostedgp · Post by **boostedgp** » Thu Oct 15, 2020 7:11 pm

Lowered on H&R springs and shackle kit. Stil. On Oem shocks for the moment.

225/45/18 wheels and tyres.

Sent from my iPhone using Tapatalk

caddychris2002 · Post by **caddychris2002** » Thu Oct 15, 2020 8:01 pm

Busy few days. Fitted new leather armrest and centre console, fitted some led lighting that does sequential indicators and a few other things. replaced strut tops that where clunking. Replaced rocker cover seals and gave the old girl an service.

Trouble i have now can't get injector 3 to seal properly. Doing my f-ing head in. Any pointers anyone

Sent from my SM-G975F using Tapatalk

thecolourpurple · Post by **thecolourpurple** » Thu Oct 15, 2020 8:29 pm

@caddychris2002 . Maybe need new stretch bolt?

Sent from my SM-N770F using Tapatalk

caddychris2002 · Post by **caddychris2002** » Fri Oct 16, 2020 1:36 am

Hi @thecolourpurple I should of said i replaced all the bolts, seals and copper washers etc.

Ordering more new bolts and copper washers from tps tomorrow going to remove the injectors for 3 and 4 make sure the seats are super clean and try again

Sent from my SM-G975F using Tapatalk

Ripley55 · Post by **Ripley55** » Fri Oct 16, 2020 4:28 pm

Just collected her from Paint
Custom Bumper Caddy/Touran R. It’s mint, well pleased

ViralEye · Post by **ViralEye** » Sat Oct 17, 2020 2:13 pm

Started the rear seat conversion and it's taken most of yesterday and this morning to get the panel out

Test fitted the single seat to see how it would look too

ViralEye · Post by **ViralEye** » Sat Oct 17, 2020 2:13 pm

Oh, and I also did the rear door trick

Such an easy and chill mod to do

ljk · Post by **ljk** » Sat Oct 17, 2020 7:58 pm

Rns510 dab, with 9w7 Bluetooth module.. Much improved over old rcd 300

CADDY2K.com