Nice. VW design language is single red stripes. If you want to go the whole way, take the lenses off the lights and continue the red on the chrome strip in there, a la GTi. The red would also work on the strip over the fog lights.
What did you do to your van today?
- anoneamus
- Hyper Poster
- Posts: 1316
- Joined: Tue Sep 30, 2014 8:11 am
- Engine size/power: 2.0 TDI (140bhp)
- Location: Cape Town
Re: What did you do to your van today?
-
Ste_J
- 100BHP+
- Posts: 165
- Joined: Sun Aug 09, 2020 9:42 pm
Re: What did you do to your van today?
Caddy badge gone and took care of the winter prep with a good clean down, polish and wax

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
- Tum-yeto
- Caddy2k Groupie
- Posts: 39
- Joined: Tue Sep 01, 2020 11:03 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: What did you do to your van today?
Stripped the old carpet flooring and ply for cleaning, sound deadening, foiled insulation and fluffy insulation as well.
Few holes in the floor where the ply had been screwed down, what’s the best way to fill these or cover them for new deadmat on there and then new ply?
Also what’s the thoughts on full coverage ply or only the indented windows plyed?



Sent from my iPhone using Tapatalk
Few holes in the floor where the ply had been screwed down, what’s the best way to fill these or cover them for new deadmat on there and then new ply?
Also what’s the thoughts on full coverage ply or only the indented windows plyed?



Sent from my iPhone using Tapatalk
-
pete3dmunds
- Caddy2k Groupie
- Posts: 29
- Joined: Fri Apr 19, 2019 12:21 am
Re: What did you do to your van today?
Personally I think full height ply looks cheap. Carpet the metalwork then the fit the carpeted panels.
To fix the holes in the floor and nice blob of skiaflex or tiger seal in the hole should fix it
To fix the holes in the floor and nice blob of skiaflex or tiger seal in the hole should fix it
-
pete3dmunds
- Caddy2k Groupie
- Posts: 29
- Joined: Fri Apr 19, 2019 12:21 am
Re: What did you do to your van today?
Personally I think full height ply looks cheap. Carpet the metalwork then the fit the carpeted panels.
To fix the holes in the floor and nice blob of skiaflex or tiger seal in the hole should fix it
Sent from my Pixel 2 using Tapatalk
To fix the holes in the floor and nice blob of skiaflex or tiger seal in the hole should fix it

Sent from my Pixel 2 using Tapatalk
- Tum-yeto
- Caddy2k Groupie
- Posts: 39
- Joined: Tue Sep 01, 2020 11:03 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: What did you do to your van today?
[mention]pete3dmunds [/mention] yeah I was thinking that too. Just carpet or would 6mm foil backed insulation on the rest of the bare metal be sufficient? So many options! My head hurts.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
pete3dmunds
- Caddy2k Groupie
- Posts: 29
- Joined: Fri Apr 19, 2019 12:21 am
Re: What did you do to your van today?
I filled the cavities with a layer of sound deadening (silent coat), closed cell foam (dodo mat), then a layer of Dacron. I left the metalwork bare, then carpeted it. Covering all the metalwork in 6mm foil insulation is overkill
Sent from my Pixel 2 using Tapatalk
Sent from my Pixel 2 using Tapatalk
Last edited by Doc on Sun Sep 27, 2020 10:26 pm, edited 1 time in total.
Reason: Removed unnecessary quote of entire previous post
Reason: Removed unnecessary quote of entire previous post
- Tum-yeto
- Caddy2k Groupie
- Posts: 39
- Joined: Tue Sep 01, 2020 11:03 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: What did you do to your van today?
[mention]pete3dmunds [/mention]what about the holes from factory? Just cover with tape? They’re pretty large and guess they may get poked through by accident? Or am I overthinking this? 

Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
-
Ryzar1
- Hyper Poster
- Posts: 639
- Joined: Fri Aug 16, 2019 12:22 am
- Engine size/power: 1.9 TDI (104bhp)
Re: What did you do to your van today?
Crappy pink dotted headlining out and ready to be painted
Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
- Papa Bear
- Hyper Poster
- Posts: 1882
- Joined: Sun Mar 01, 2020 10:44 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Location: Hampshire, UK
Re: What did you do to your van today?
@ryzar1 paint or dye?
Caddy Maxi Life 1.6TDI 7 speed DSG 102bhp
Black
Marmite lover!!!
VCDS
Black
Marmite lover!!!
VCDS
-
Ryzar1
- Hyper Poster
- Posts: 639
- Joined: Fri Aug 16, 2019 12:22 am
- Engine size/power: 1.9 TDI (104bhp)
Re: What did you do to your van today?
It’s a vinyl and fabric paint I did the a pillars as well a while ago and the ply roof
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Ryzar1
- Hyper Poster
- Posts: 639
- Joined: Fri Aug 16, 2019 12:22 am
- Engine size/power: 1.9 TDI (104bhp)
Re: What did you do to your van today?
The whole front half of the cabin’s been done now
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Ryzar1
- Hyper Poster
- Posts: 639
- Joined: Fri Aug 16, 2019 12:22 am
- Engine size/power: 1.9 TDI (104bhp)
Re: What did you do to your van today?

Sent from my iPhone using Tapatalk
-
Ryzar1
- Hyper Poster
- Posts: 639
- Joined: Fri Aug 16, 2019 12:22 am
- Engine size/power: 1.9 TDI (104bhp)
Re: What did you do to your van today?

Sent from my iPhone using Tapatalk
- Peng
- Caddy Fan
- Posts: 75
- Joined: Mon Sep 14, 2020 8:20 am
Re: What did you do to your van today?
@Ryzar1 what paint did you use for that? Looks to have come out pretty good
Sent from my SM-G973F using Tapatalk
Sent from my SM-G973F using Tapatalk