Hi,
I've just re-fitted a rear wiper on my van as the previous owner removed it. I was just wondering is there a certain way the grommet in the picture fits as there is a cut out in it
Thanks
Sent from my SM-G950F using Tapatalk
Rear wiper fitting
-
- 100BHP+
- Posts: 100
- Joined: Tue Feb 04, 2020 7:43 pm
- Engine size/power: 1.6 CR TDI (102bhp)
- Doc
- Not God, just a bellend
- Posts: 18445
- Joined: Thu Jan 01, 1970 1:00 am
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Monaghan, Ireland & Derbyshire, UK
Re: Rear wiper fitting
Not sure if that's an alignment cutout or where the locking tab should be.
It's been a while but from memory the shaft of the wiper motor holds the locking tabs of that grommet out so it can't be removed while the motor is in place.
It's been a while but from memory the shaft of the wiper motor holds the locking tabs of that grommet out so it can't be removed while the motor is in place.
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit
All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort